TopDuck Products, LLC
PO Box 80466
Lansing, MI 48908
517.321.8416
info@topduckproducts.com

How to Apply



Gunzilla can be applied with a patch, brush or spray. In heavily fouled bores a brush and/or cleaning jag of the appropriate caliber is recommended. After applying Gunzilla run a dry patch to remove the fouling. Repeat until the dry patches are removed with no fouling on the patches. In a dry dusty environment we recommend using some additional dry patches to be sure the weapon is wiped dry. The dry coating left behind will provide lubrication and protection. If extra lubrication is required on moving parts use a lightly moistened patch with Gunzilla and run over the area or place some drops of Gunzilla where you would normally use gun oil or other lubricants.




General Directions | Military | How to Apply | Heavy Carbon & Plastic Fouling
Cleaning Wood, Plastic Parts or Special Finishes | Removing Rust | Wet Environment, Salt Water & Long Term Storage
Cleaning Black Powder | Cleaning Corrosive Ammo | Arctic & Extreme Cold Weather Operations
Desert & Dry Environment | Copper & Lead | Copperzilla

Copyright © 2017 TopDuck Products, LLC.. Powered by Zen Cart